{"title":"Monitors \u0026 Displays","description":"\u003cp\u003eExplore replacement monitors, display panels, instrument clusters and electronic display assemblies for heavy equipment and construction machinery.\u003c\/p\u003e\n\u003cp\u003eXAVORNIK supplies aftermarket monitor solutions organized by reference part number, machine model, connector configuration and application. Our products cover excavators, loaders and other heavy-duty equipment from major manufacturers.\u003c\/p\u003e\n\u003cp\u003eAlways verify the original part number, connector layout, mounting points and machine information before ordering.\u003c\/p\u003e","products":[{"product_id":"386-3457-327-7482-450-0714-monitor-for-cat-320d","title":"386-3457 327-7482 450-0714 Excavator Monitor for CAT Caterpillar 312D 319D 320D 330D","description":"\u003ch2\u003e386-3457 Operator Monitor for Selected CAT D-Series Excavators\u003c\/h2\u003e\n\n\u003cp\u003eThis new XAVORNIK aftermarket operator monitor is referenced to part numbers 386-3457, 327-7482 and 450-0714. It is designed for selected CAT D-series excavators using the matching monitor housing, connectors, pin configuration and electrical system.\u003c\/p\u003e\n\n\u003cp\u003eThis monitor displays important machine operating information. Compatibility must be confirmed from the original monitor and machine configuration before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eReference Numbers\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e386-3457, 327-7482, 450-0714\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese part numbers are provided for product identification and cross-reference searches. A reference number or machine model alone does not guarantee compatibility. Always compare the complete original monitor number and physical configuration.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Excavator Applications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAT 312D and 312D L\u003c\/li\u003e\n\u003cli\u003eCAT 319D, 319D L and 319D LN\u003c\/li\u003e\n\u003cli\u003eCAT 320D, 320D L, 320D LN, 320D LRR, 320D GC, 320D FM and 320D RR\u003c\/li\u003e\n\u003cli\u003eCAT 323D, 323D L, 323D LN and 323D SA\u003c\/li\u003e\n\u003cli\u003eCAT 324D, 324D L, 324D LN and selected 324D FM configurations\u003c\/li\u003e\n\u003cli\u003eCAT 325D, 325D L and selected 325D FM or MH configurations\u003c\/li\u003e\n\u003cli\u003eCAT 328D LCR\u003c\/li\u003e\n\u003cli\u003eCAT 329D, 329D L and 329D LN\u003c\/li\u003e\n\u003cli\u003eCAT 330D, 330D L, 330D LN and selected 330D MH or FM configurations\u003c\/li\u003e\n\u003cli\u003eCAT 336D, 336D L and 336D LN\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAdditional catalog applications may include selected 311D LRR, 313D, 315D L, 318D, 326D L, 340D, 345D, 349D, M330D and M325D material-handling configurations. These applications require confirmation from the original monitor number and machine serial number.\u003c\/p\u003e\n\n\u003ch2\u003eMonitor Configuration\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGray horizontal operator monitor housing\u003c\/li\u003e\n\u003cli\u003eABS-style monitor casing\u003c\/li\u003e\n\u003cli\u003eAttached pigtail harness\u003c\/li\u003e\n\u003cli\u003eTwo 12-pin electrical connectors\u003c\/li\u003e\n\u003cli\u003eRCA camera connection\u003c\/li\u003e\n\u003cli\u003eOperating system designed for selected 18–32V machine applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe connector keying, pin arrangement, wiring, rear bracket and button layout must match the original monitor. Similar-looking monitors may use different wiring or communication protocols.\u003c\/p\u003e\n\n\u003ch2\u003eRequired Fitment Check\u003c\/h2\u003e\n\n\u003cp\u003eBefore ordering, compare all of the following:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eComplete part number on the original monitor\u003c\/li\u003e\n\u003cli\u003eMachine model and serial number or Product Identification Number\u003c\/li\u003e\n\u003cli\u003eFront screen shape and gray housing\u003c\/li\u003e\n\u003cli\u003eButton quantity, symbols and layout\u003c\/li\u003e\n\u003cli\u003eTwo 12-pin connectors and connector keying\u003c\/li\u003e\n\u003cli\u003ePin positions and machine-side wiring\u003c\/li\u003e\n\u003cli\u003eRCA camera connector\u003c\/li\u003e\n\u003cli\u003eRear mounting bracket and mounting points\u003c\/li\u003e\n\u003cli\u003eOperating voltage and communication system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf the original part number is missing or unreadable, send clear photos of the front panel, rear housing, connectors, mounting bracket and machine information plate before ordering.\u003c\/p\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e1 x New aftermarket operator monitor assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOnly the components shown in the product photos are included. Additional wiring, mounting hardware, camera cables and brackets are not included unless specifically pictured or stated.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Information\u003c\/h2\u003e\n\n\u003cp\u003eDisconnect the machine power supply before installation. Inspect the equipment-side connectors, terminals and wiring harness for bent pins, corrosion, loose terminals, water damage or short circuits. A damaged machine-side harness may damage the replacement monitor.\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended. Depending on the machine serial number and configuration, initialization, calibration or software matching may be required. Do not assume plug-and-play compatibility from the machine model alone.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\n\u003cp\u003eThis aftermarket monitor is covered by the XAVORNIK 12-month limited warranty against manufacturing defects. Damage caused by incorrect wiring, short circuits, water ingress, impact, unauthorized disassembly or improper installation is not covered.\u003c\/p\u003e\n\n\u003cp\u003eXAVORNIK is an independent aftermarket brand and is not affiliated with Caterpillar Inc. CAT and Caterpillar are trademarks of their respective owner and are used only to identify product compatibility.\u003c\/p\u003e","brand":"XAVORNIK","offers":[{"title":"Default Title","offer_id":45811684835375,"sku":"MON-CAT-D-3863457","price":1299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/files\/01-White-Background-Main-Image-2000x2000.png?v=1786518670"},{"product_id":"20r-9083-244-1716-260-2193-monitor-caterpillar-excavator","title":"XAVORNIK 20R-9083 244-1716 260-2193 Monitor for CAT Caterpillar 323D 324D 325D 330D","description":"\u003ch2\u003e20R-9083 244-1716 260-2193 Operator Monitor for Selected CAT D-Series Excavators\u003c\/h2\u003e\n\n\u003cp\u003eThis new XAVORNIK aftermarket operator monitor is referenced to part numbers 20R-9083, 244-1716 and 260-2193. It is intended for selected CAT D-series excavators using the matching monitor housing, electrical connectors, pin configuration, mounting structure and machine communication system.\u003c\/p\u003e\n\n\u003cp\u003eThe product sold in this listing is a new aftermarket replacement. It is not a genuine CAT product, used monitor or CAT Reman unit.\u003c\/p\u003e\n\n\u003ch2\u003eReference Numbers\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e20R-9083, 244-1716, 260-2193\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese numbers are provided for product identification and cross-reference searches. They should not be treated as an unconditional interchange chain. The complete original monitor number and physical configuration must be verified before ordering.\u003c\/p\u003e\n\n\u003ch2\u003ePart Number Information\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20R-9083:\u003c\/strong\u003e CAT Reman operator monitor reference officially shown as an alternative to monitor number 386-3457.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e244-1716:\u003c\/strong\u003e Discontinued CAT display assembly reference covering selected excavators and other heavy-equipment configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e260-2193:\u003c\/strong\u003e Discontinued CAT monitor group reference covering selected excavators, material handlers and related configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePublic parts information does not establish that 244-1716 and 260-2193 automatically interchange with 20R-9083 in every application. Physical and electrical verification is required.\u003c\/p\u003e\n\n\u003ch2\u003eCore Excavator Applications\u003c\/h2\u003e\n\n\u003cp\u003eTypical overlapping applications within this reference-number group include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAT 323D and selected 323D L configurations\u003c\/li\u003e\n\u003cli\u003eCAT 324D and selected 324D L configurations\u003c\/li\u003e\n\u003cli\u003eCAT 325D and selected 325D L configurations\u003c\/li\u003e\n\u003cli\u003eCAT 330D and selected 330D L configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe base machine model does not confirm compatibility. Coverage varies according to machine serial number, monitor number, wiring, installed options and regional configuration.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional 20R-9083 Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe CAT catalog lists 20R-9083 for selected configurations of the following machines:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e312D, 312D L\u003c\/li\u003e\n\u003cli\u003e319D L and 319D LN\u003c\/li\u003e\n\u003cli\u003e320D, 320D L, 320D LN, 320D LRR, 320D GC, 320D FM and 320D RR\u003c\/li\u003e\n\u003cli\u003e323D and 323D L\u003c\/li\u003e\n\u003cli\u003e324D, 324D L and 324D LN\u003c\/li\u003e\n\u003cli\u003e325D and 325D L\u003c\/li\u003e\n\u003cli\u003e328D LCR\u003c\/li\u003e\n\u003cli\u003e329D, 329D L and 329D LN\u003c\/li\u003e\n\u003cli\u003e330D, 330D L, 330D LN and 330D MH\u003c\/li\u003e\n\u003cli\u003e336D, 336D L and 336D LN\u003c\/li\u003e\n\u003cli\u003eSelected 340D, 345D, 349D, 365C, 374D, 385C and 390D configurations\u003c\/li\u003e\n\u003cli\u003eSelected M330D wheeled excavators and M325D material handlers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAdditional 244-1716 Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe CAT catalog lists 244-1716 for selected configurations including:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e320D and 320D L\u003c\/li\u003e\n\u003cli\u003e323D S, 323D SA, 323D L and 323D LN\u003c\/li\u003e\n\u003cli\u003e324D and 324D L\u003c\/li\u003e\n\u003cli\u003e325D and 325D L\u003c\/li\u003e\n\u003cli\u003e329D and 329D L\u003c\/li\u003e\n\u003cli\u003e330D and 330D L\u003c\/li\u003e\n\u003cli\u003e336D and 336D L\u003c\/li\u003e\n\u003cli\u003eSelected 345C, 345D, 365C and 385C excavators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCAT also lists 244-1716 for selected motor graders, track-type tractors, compactors and the 613G scraper. These additional equipment types are not presented as confirmed applications for this aftermarket monitor. Contact XAVORNIK and compare the original monitor before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional 260-2193 Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe CAT catalog lists 260-2193 for selected configurations including:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e323D L\u003c\/li\u003e\n\u003cli\u003e324D, 324D L and 324D LN\u003c\/li\u003e\n\u003cli\u003e325D and 325D L\u003c\/li\u003e\n\u003cli\u003e329D L\u003c\/li\u003e\n\u003cli\u003e330D L, 330D LN and 330D MH\u003c\/li\u003e\n\u003cli\u003eSelected 345C, 345D, 365C and 385C excavators\u003c\/li\u003e\n\u003cli\u003eSelected M325D material handlers and M330D wheeled excavators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMonitor Configuration\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGray horizontal operator monitor housing\u003c\/li\u003e\n\u003cli\u003eAttached pigtail wiring harness\u003c\/li\u003e\n\u003cli\u003eTwo 12-pin electrical connectors\u003c\/li\u003e\n\u003cli\u003eRCA camera connection\u003c\/li\u003e\n\u003cli\u003eConfiguration intended for selected 18–32V machine systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe connector keying, pin arrangement, wiring, button layout, rear bracket and communication system must match the original monitor. Similar-looking displays may use different wiring or internal configurations.\u003c\/p\u003e\n\n\u003ch2\u003eRequired Fitment Verification\u003c\/h2\u003e\n\n\u003cp\u003eBefore ordering, compare all of the following:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eComplete part number on the original monitor\u003c\/li\u003e\n\u003cli\u003eMachine model and serial number or Product Identification Number\u003c\/li\u003e\n\u003cli\u003eFront screen style and gray horizontal housing\u003c\/li\u003e\n\u003cli\u003eButton quantity, symbols and layout\u003c\/li\u003e\n\u003cli\u003eTwo 12-pin connectors and connector keying\u003c\/li\u003e\n\u003cli\u003eConnector pin positions and machine-side wiring\u003c\/li\u003e\n\u003cli\u003eRCA camera connector\u003c\/li\u003e\n\u003cli\u003eRear bracket, mounting points and overall dimensions\u003c\/li\u003e\n\u003cli\u003eMachine operating voltage and communication system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf the original monitor number is missing or unreadable, send clear photos of the front panel, rear housing, connectors, wiring, mounting bracket and machine information plate to sales@xavornik.com before ordering.\u003c\/p\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e1 x New XAVORNIK aftermarket operator monitor assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOnly the components shown in the product photos are included. Additional wiring, mounting hardware, brackets and camera cables are not included unless specifically pictured or stated.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Information\u003c\/h2\u003e\n\n\u003cp\u003eDisconnect the machine power supply before installation. Inspect the equipment-side connectors, terminals and wiring harness for bent pins, corrosion, water damage, loose terminals, damaged insulation or short circuits. A damaged machine-side electrical system may damage the replacement monitor.\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended. Do not connect the monitor until the part number, connector configuration, pin arrangement and machine voltage have been confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\n\u003cp\u003eThis XAVORNIK aftermarket monitor is covered by a 12-month limited warranty against manufacturing defects. Damage caused by incorrect wiring, short circuits, water ingress, impact, incorrect machine application, unauthorized disassembly or improper installation is not covered.\u003c\/p\u003e\n\n\u003cp\u003eXAVORNIK is an independent aftermarket brand and is not affiliated with Caterpillar Inc. CAT and Caterpillar are trademarks of their respective owner and are used only to identify product compatibility.\u003c\/p\u003e","brand":"XAVORNIK","offers":[{"title":"Default Title","offer_id":45812206141487,"sku":"MON-CAT-D-3863457-SH-L02","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/files\/01-White-Background-Main-Image-2000x2000_45851b20-5f6e-401e-8a22-7a3d9b0b1f02.png?v=1786520012"},{"product_id":"309-5711-515-3302-cat-320d2-336d2-monitor","title":"309-5711 515-3302 525-1721 484-8026 500-9171 Monitor for CAT 320D2 336D2 336E","description":"```html\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket A400 monitor and control display for select Caterpillar excavators and forestry equipment. This listing includes one monitor. The listed part numbers are identification and cross-reference numbers, not the package quantity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProgramming is included after the original part number, machine information and physical configuration have been verified.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eReference Part Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e309-5711\u003c\/li\u003e\n  \u003cli\u003e515-3302\u003c\/li\u003e\n  \u003cli\u003e525-1721\u003c\/li\u003e\n  \u003cli\u003e484-8026\u003c\/li\u003e\n  \u003cli\u003e500-9171\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese reference numbers may represent different production dates, software configurations or machine arrangements. Do not determine compatibility from a reference number or machine model alone.\u003c\/p\u003e\n\n\u003ch2\u003eReference Applications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eReference Number\u003c\/th\u003e\n      \u003cth\u003eReference Applications\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e309-5711\u003c\/td\u003e\n      \u003ctd\u003e320D2, 320D2 L, 320D2 FM, 336D2, 349E L, 538, 568 FM and 568 FM LL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e525-1721\u003c\/td\u003e\n      \u003ctd\u003e336D2, 336E H, 336E LH, 336E LNH, 349F L, 352F-VG, 538, 548, 558, 568 FM and 568 FM LL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e484-8026\u003c\/td\u003e\n      \u003ctd\u003e320D2 FM, 568 FM and 568 FM LL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e515-3302\u003c\/td\u003e\n      \u003ctd\u003eCross-reference number for selected A400 monitor applications. Exact fitment must be verified using the original label, machine serial number, housing and connectors.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e500-9171\u003c\/td\u003e\n      \u003ctd\u003eCross-reference number for selected A400 monitor applications. Exact fitment must be verified using the original label, machine serial number, housing and connectors.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The application table combines the reference coverage of the individual part numbers. It does not mean that every listed part number fits every listed machine.\u003c\/p\u003e\n\n\u003ch2\u003eFitment Verification Required\u003c\/h2\u003e\n\u003cp\u003ePlease provide the following information before ordering:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal monitor part number\u003c\/li\u003e\n  \u003cli\u003eComplete machine model\u003c\/li\u003e\n  \u003cli\u003eMachine serial number or PIN\u003c\/li\u003e\n  \u003cli\u003eEngine serial number, if available\u003c\/li\u003e\n  \u003cli\u003eClear photo of the complete front display\u003c\/li\u003e\n  \u003cli\u003eClear photo of the rear housing and identification label\u003c\/li\u003e\n  \u003cli\u003eClear photos of all rear and side connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe front display layout, mounting points, rear housing, connector quantity, connector keying and pin arrangement must match the original monitor.\u003c\/p\u003e\n\n\u003ch2\u003eProgramming\u003c\/h2\u003e\n\u003cp\u003eThe listed price includes programming based on the verified machine information supplied by the customer. Programming begins only after all required fitment information has been reviewed and accepted.\u003c\/p\u003e\n\n\u003cp\u003eEstimated processing time is 2–3 business days after the fitment and programming information has been verified. Incorrect or incomplete machine information may delay processing or result in an incompatible configuration.\u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × New aftermarket A400 monitor\/control group\u003c\/li\u003e\n  \u003cli\u003eProgramming based on verified machine information\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eNot Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWiring harness\u003c\/li\u003e\n  \u003cli\u003eMounting bracket or mounting hardware\u003c\/li\u003e\n  \u003cli\u003eSensors or external control modules\u003c\/li\u003e\n  \u003cli\u003eInstallation labor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eProfessional installation and electrical-system inspection are strongly recommended. Check the machine voltage, wiring harness, connector condition, grounds and related control modules before installing the replacement monitor.\u003c\/p\u003e\n\n\u003cp\u003eDo not connect the monitor to damaged wiring, bent pins, loose terminals or a system with an unresolved short circuit. External electrical faults may damage the replacement unit.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e12-Month Limited Warranty\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe warranty covers confirmed manufacturing defects under normal use. Damage caused by incorrect fitment information, improper installation, short circuits, damaged connectors or wiring, external electrical faults, unauthorized disassembly, water ingress, impact or modification is not covered.\u003c\/p\u003e\n\n\u003cp\u003eThis item is programmed specifically for the verified machine information supplied by the customer. Damage or incompatibility caused by incorrect or incomplete machine information is not covered.\u003c\/p\u003e\n\n\u003cp\u003eReturns and warranty claims are subject to the XAVORNIK Returns \u0026amp; Refund Policy.\u003c\/p\u003e\n\n\u003ch2\u003eTrademark Notice\u003c\/h2\u003e\n\u003cp\u003eXAVORNIK is not affiliated with Caterpillar Inc. Caterpillar and machine model names are used only to identify product compatibility.\u003c\/p\u003e","brand":"XAVORNIK","offers":[{"title":"Default Title","offer_id":45814254731311,"sku":"MON-CAT-D2E-A400-PGM","price":1529.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/files\/asset-363.png?v=1786527134"},{"product_id":"436-6210-20r-7974-548-9082-540-6526-cat-monitor","title":"436-6210 20R-7974 548-9082 540-6526 A400\/A4000 Monitor for CAT 320E 336E 349E","description":"```html\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eNew aftermarket A400\/A4000 operator monitor for select Caterpillar D2, E and F-series excavators, wheeled excavators, material handlers and forestry equipment.\u003c\/p\u003e\n\n\u003cp\u003eThis listing includes one programmed monitor. The reference numbers identify possible monitor applications and do not indicate the package quantity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProgramming is included after the original part number, machine information and physical configuration have been verified.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eReference Part Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e436-6210\u003c\/li\u003e\n  \u003cli\u003e20R-7974\u003c\/li\u003e\n  \u003cli\u003e548-9082\u003c\/li\u003e\n  \u003cli\u003e540-6526\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e436-6210 is associated with an operator monitor configuration using 6-pin and 12-pin connectors. 20R-7974 is a remanufactured reference associated with 436-6210. The product supplied by XAVORNIK is a new aftermarket replacement and is not a genuine Cat or Cat Reman product.\u003c\/p\u003e\n\n\u003cp\u003e548-9082 is associated with an A4000 controller operator monitor. 540-6526 is an earlier A400 control-group reference. These part numbers may represent different production dates, software configurations or machine arrangements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo not assume that all four reference numbers are interchangeable on every listed machine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eReference Applications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eReference Number\u003c\/th\u003e\n      \u003cth\u003eSelected Reference Applications\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e436-6210 \/ 20R-7974\u003c\/td\u003e\n      \u003ctd\u003eSelected 311F, 312E, 312F, 313F, 314E, 314F, 315F, 316E, 316F, 318E, 318F, 320D2, 320E, 320F, 323D2, 323E, 323F, 324E, 325F, 326D2, 326F, 329D2, 329E, 329F, 330D2, 330F, 335F, 336D2, 336E, 336F, 340D2, 340F, 349D2, 349E, 349F, 352F, 374F and 390F configurations.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e548-9082\u003c\/td\u003e\n      \u003ctd\u003eSelected 311F, 312E, 313F, 314E, 314F, 315F, 316E, 318E, 320D2, 320E, 323D2, 323E, 323F, 324E, 326D2, 329D2, 329E, 330D2, 336D2, 336E, 336F, 340D2, 349D2, 349E, 349F, 352F, 374F and 390F configurations.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e540-6526\u003c\/td\u003e\n      \u003ctd\u003eSelected 311F, 312E, 312F, 313F, 314E, 314F, 315F, 316E, 316F, 318E, 318F, 320D2, 320E, 320F, 323D2, 323E, 323F, 324E, 325F, 326D2, 326F, 329D2, 329E, 329F, 330D2, 330F, 335F, 336D2, 336E, 336F, 340F, 349E, 349F and 352F configurations.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAdditional Equipment Applications\u003c\/h2\u003e\n\u003cp\u003eDepending on the original monitor number and machine configuration, reference coverage may also include selected M314F, M316F, M318F, M320F, M322F and M323F wheeled excavators; MH3022, MH3024 and MH3026 material handlers; and 538, 548, 558, 568 FM and 568 FM LL forestry equipment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The application information combines the reference coverage of the individual part numbers. It does not mean that every listed reference number fits every machine or serial-number range.\u003c\/p\u003e\n\n\u003ch2\u003eFitment Verification Required\u003c\/h2\u003e\n\u003cp\u003ePlease provide the following information before ordering:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal monitor part number\u003c\/li\u003e\n  \u003cli\u003eComplete machine model, including suffixes\u003c\/li\u003e\n  \u003cli\u003eMachine serial number or PIN\u003c\/li\u003e\n  \u003cli\u003eEngine serial number, if available\u003c\/li\u003e\n  \u003cli\u003eClear photo of the complete front display and button layout\u003c\/li\u003e\n  \u003cli\u003eClear photo of the rear housing and identification label\u003c\/li\u003e\n  \u003cli\u003eClear photos of all connectors and connector pins\u003c\/li\u003e\n  \u003cli\u003eClear photo of the mounting bracket and mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe front-panel layout, rear housing, mounting points, connector quantity, 6-pin and 12-pin connector arrangement, connector keying and pin configuration must match the original monitor.\u003c\/p\u003e\n\n\u003ch2\u003eProgramming\u003c\/h2\u003e\n\u003cp\u003eThe listed price includes programming based on the verified machine information supplied by the customer. Programming begins only after the original part number, machine PIN, connector configuration and required software information have been reviewed.\u003c\/p\u003e\n\n\u003cp\u003eEstimated processing time is 2–3 business days after all fitment and programming information has been verified. Incorrect or incomplete machine information may delay processing or result in an incompatible configuration.\u003c\/p\u003e\n\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × New aftermarket A400\/A4000 operator monitor\u003c\/li\u003e\n  \u003cli\u003eProgramming based on verified machine information\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eNot Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWiring harness\u003c\/li\u003e\n  \u003cli\u003eMounting bracket or mounting hardware\u003c\/li\u003e\n  \u003cli\u003eCamera or video cable\u003c\/li\u003e\n  \u003cli\u003eSensors or external control modules\u003c\/li\u003e\n  \u003cli\u003eInstallation labor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Requirements\u003c\/h2\u003e\n\u003cp\u003eProfessional installation and electrical-system inspection are strongly recommended. Before connecting the replacement monitor, inspect the machine voltage, power supply, grounds, wiring harness, connector terminals and related control modules.\u003c\/p\u003e\n\n\u003cp\u003eDo not install the monitor when the machine has bent pins, loose terminals, damaged connectors, incorrect voltage, reversed polarity, water-damaged wiring or an unresolved short circuit. External electrical faults may immediately damage the replacement monitor.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e12-Month Limited Warranty\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe warranty covers confirmed manufacturing defects under normal use. Damage caused by incorrect fitment information, improper installation, short circuits, incorrect voltage, damaged connectors or wiring, external electrical faults, unauthorized disassembly, water ingress, impact or modification is not covered.\u003c\/p\u003e\n\n\u003cp\u003eThis monitor is programmed specifically for the verified machine information supplied by the customer. Damage or incompatibility caused by incorrect or incomplete machine information is not covered.\u003c\/p\u003e\n\n\u003cp\u003eReturns and warranty claims are subject to the XAVORNIK Returns \u0026amp; Refund Policy.\u003c\/p\u003e\n\n\u003ch2\u003eTrademark Notice\u003c\/h2\u003e\n\u003cp\u003eXAVORNIK is not affiliated with Caterpillar Inc. Caterpillar, Cat and the referenced machine model names are used only to identify product compatibility.\u003c\/p\u003e\n```","brand":"XAVORNIK","offers":[{"title":"Default Title","offer_id":45814345760815,"sku":"MON-CAT-D2E-A400-PGM-SH-L02","price":1529.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/files\/asset-363_7dcc84fb-c8d4-4865-9d2b-5595fa689530.png?v=1786529826"},{"product_id":"338-6918-366-8729-366-8785-386-3447-433-4526-444-7834-456-2194-monitor-cat","title":"338-6918 366-8729 366-8785 386-3447 433-4526 444-7834 456-2194 Monitor for CAT 320D2 320E 324E 336E 568 FM | XAVORNIK","description":"\u003cp\u003e\u003cstrong\u003eNew aftermarket replacement operator monitor\/control group for selected CAT D2- and E-series excavator and forestry-machine applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers selected monitor references including 338-6918, 366-8729, 366-8785, 386-3447, 433-4526, 444-7834 and 456-2194. Programming is included after the machine and original monitor information has been verified.\u003c\/p\u003e\n\n\u003cdiv style=\"padding: 14px; margin: 16px 0; border: 1px solid #d8a400; background-color: #fff8dc;\"\u003e\n  \u003cstrong\u003eFitment verification is required before production.\u003c\/strong\u003e\u003cbr\u003e\n  These part numbers cover different machine serial ranges, hardware configurations and software profiles. Not every listed part number fits every listed machine model.\n\u003c\/div\u003e\n\n\u003ch2\u003eReference Part Numbers\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e338-6918\u003c\/li\u003e\n  \u003cli\u003e366-8729\u003c\/li\u003e\n  \u003cli\u003e366-8785\u003c\/li\u003e\n  \u003cli\u003e386-3447\u003c\/li\u003e\n  \u003cli\u003e433-4526\u003c\/li\u003e\n  \u003cli\u003e444-7834\u003c\/li\u003e\n  \u003cli\u003e456-2194\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese numbers are provided for identification and cross-reference searches. A matching reference number does not by itself confirm compatibility. Always compare the original monitor label, front display and button layout, rear housing, connectors and mounting points.\u003c\/p\u003e\n\n\u003ch2\u003ePart Number and Catalog Notes\u003c\/h2\u003e\n\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eReference Number\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eCatalog Identification and Reference Applications\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e338-6918\u003c\/td\u003e\n      \u003ctd\u003eOperator monitor cross-reference for selected D2- and E-series applications. Exact machine PIN, hardware and software verification is required.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e366-8729\u003c\/td\u003e\n      \u003ctd\u003eOperator monitor cross-reference for selected D2- and E-series applications. Exact machine PIN, hardware and software verification is required.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e366-8785\u003c\/td\u003e\n      \u003ctd\u003eControl-group kit reference associated with selected 329E L, 336E L, 336E LN, 349E L VG, 568 FM and 568 FM LL applications.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e386-3447\u003c\/td\u003e\n      \u003ctd\u003eControl-group kit reference associated with selected 568 FM and 568 FM LL applications.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e433-4526\u003c\/td\u003e\n      \u003ctd\u003eControl-group kit reference associated with selected 568 FM and 568 FM LL applications.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e444-7834\u003c\/td\u003e\n      \u003ctd\u003eA400 control-group reference associated with selected 568 FM and 568 FM LL applications.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e456-2194\u003c\/td\u003e\n      \u003ctd\u003eOperator monitor cross-reference for selected D2- and E-series applications. Exact machine PIN, hardware and software verification is required.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSelected Reference Applications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCAT 320D2, 320D2 L and 320D2 FM\u003c\/li\u003e\n  \u003cli\u003eCAT 320E, 320E L, 320E LN and 320E LRR\u003c\/li\u003e\n  \u003cli\u003eCAT 324E and 324E L\u003c\/li\u003e\n  \u003cli\u003eCAT 329E L and 329E LN\u003c\/li\u003e\n  \u003cli\u003eCAT 336E, 336E L and 336E LN\u003c\/li\u003e\n  \u003cli\u003eCAT 349E L and 349E L VG\u003c\/li\u003e\n  \u003cli\u003eCAT 568 FM and 568 FM LL\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The model list represents combined catalog and cross-reference coverage. It does not mean that every listed part number is compatible with every listed machine. Compatibility can vary by machine PIN, production date, cab configuration, monitor hardware and software version.\u003c\/p\u003e\n\n\u003cp\u003eEngine references found across selected applications may include C6.6, C7.1, C9.3 and C13. The engine model must only be used as supporting information and cannot confirm monitor compatibility by itself.\u003c\/p\u003e\n\n\u003ch2\u003eInformation Required Before Production\u003c\/h2\u003e\n\n\u003cp\u003ePlease provide all of the following information after placing the order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThe complete original monitor part number\u003c\/li\u003e\n  \u003cli\u003eThe machine model\u003c\/li\u003e\n  \u003cli\u003eThe complete machine serial number or Product Identification Number (PIN)\u003c\/li\u003e\n  \u003cli\u003eA clear front photo showing the LCD, indicator areas and all buttons\u003c\/li\u003e\n  \u003cli\u003eA clear rear photo showing the housing, label and mounting points\u003c\/li\u003e\n  \u003cli\u003eClear close-up photos of every electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eProduction will not begin until the fitment information has been reviewed and approved.\u003c\/p\u003e\n\n\u003ch2\u003eProgramming\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProgramming is included in the product price.\u003c\/li\u003e\n  \u003cli\u003eThe monitor will be prepared according to the verified machine and original monitor information.\u003c\/li\u003e\n  \u003cli\u003eNormal processing time is 2–3 business days after verification.\u003c\/li\u003e\n  \u003cli\u003eAdditional machine-side setup, parameter confirmation or calibration may be required after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × programmed aftermarket operator monitor\/control group\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWiring harnesses, mounting brackets, sensors, converters, installation hardware and diagnostic tools are not included unless clearly shown in the product photos.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\n\u003cp\u003eProfessional installation by a qualified heavy-equipment technician is strongly recommended. Check machine voltage, wiring condition, grounds and communication circuits before connecting the replacement monitor. Incorrect wiring, unstable voltage or short circuits may damage electronic components.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\n\u003cp\u003eThis product includes a 12-month limited warranty covering verified manufacturing defects under normal use. The warranty does not cover incorrect ordering, inaccurate machine information, improper installation, wiring or voltage faults, liquid damage, impact damage, fire damage, unauthorized disassembly or modification.\u003c\/p\u003e\n\n\u003ch2\u003eReturn Restriction\u003c\/h2\u003e\n\n\u003cp\u003eThis is a programmed electronic product prepared according to the information supplied by the customer. Returns are not accepted for ordering errors, incorrect part numbers, incorrect machine information or unverified fitment. If a product defect is suspected, contact us before removal or return and provide photos, video and diagnostic information for review.\u003c\/p\u003e\n\n\u003ch2\u003eTrademark Notice\u003c\/h2\u003e\n\n\u003cp\u003eCaterpillar and CAT are trademarks of Caterpillar Inc. XAVORNIK is not affiliated with, sponsored by or endorsed by Caterpillar Inc. Part numbers, model names and trademarks are used only for identification and compatibility-reference purposes.\u003c\/p\u003e","brand":"XAVORNIK","offers":[{"title":"Default Title","offer_id":45814355460143,"sku":"MON-CAT-D2E-A400-PGM-SH-L03","price":1529.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/files\/asset-363_f443087d-2b23-4644-a83b-e8e0ad8ab5b3.png?v=1786530771"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8077\/0095\/collections\/Monitor-1.png?v=1786000882","url":"https:\/\/xavornik.com\/collections\/heavy-equipment-monitors-displays.oembed","provider":"XAVORNIK","version":"1.0","type":"link"}